Audio Technica AT2035-Studio

Recording pack 

• Manufacturer: Audio Technica
• Reference: AT2035-Studio

Accessories

• AT2035 Condenser Microphone
• ATH-M40X Monitor Headphones
• Audient iD4 Black Audio Interface
• Also includes a range of accessories

Microphone

• Element Fixed-charge back plate, permanently polarized condenser
• Polar Pattern Cardioid
• Frequency Response 20 - 20,000 Hz
• Open Circuit Sensitivity -33 dB (22.4 mV) re 1V at 1 Pa
• Impedance 120 ohms
• Maximum Input Sound Level 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
• Low Frequency Roll Off 80 Hz, 12 dB/octave
• Dynamic Range 136 dB, 1 kHz at Max SPL
• Signal-to-Noise Ratio 82 dB, 1 kHz at 1 Pa
• Phantom Power Requirements 11-52V DC, 3.8 mA typical
• Weight 403g
• Dimensions 170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameter
• Output Connector Integral 3-pin XLRM-type
• Accessories Included AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch

Headphones

• Type Dinámicos cerrados
• Driver Diameter 40mm
• Magnet Neodymium
• Voice Coil CCAW (Copper-clad aluminum wire)
• Maximum Input Power 1,600 mW @ 1KHz
• Sensitivity 98 dB/mW
• Impedance 35 ohms
• Folding/collapsible Yes
• Weight 240g (without cable)
• Cable - Detachable Yes
• Connector Gold-plated stereo 1/8” (3.5 mm) connector with 6.3 mm (1/4”) screw-on adapter
• Accessories Included 6.3 mm (1/4”) screw-on adapter, Pouch

Interface Minimum Specification Requirements

• macOS 10.7.5 and later
• Windows 7 and later
• iOS 6 and later

*  To use iD4 with an iOS device a camera adapter kit and a powered USB 2.0 hub is required